Voltatex 7327 A ECO


Magnet wires insulated with Voltatex® 7327 A ECO combine a high degree of thermal rating with excellent mechanical properties. Additional typical properties are their good chemical resistance and a high level of flexibility.  In order to achieve increased resistance to chemicals, an application combined with polyamideimide based topcoat (e.g. Voltatex 81.., Voltatex 82.. or Voltatex 85..) is possible. Magnet wires coated with Voltatex 7327 A ECO exceed the requirements and technical conditions of IEC 60317-8, IEC 60317-13 and acc. ANSI/NEMA MW 30-C, MW 72-C and MW 74-C.  Combined with other Voltatex wire enamel products Voltatex 7327 A ECO is usable for wires acc. ANSI/NEMA MW 35-C, MW 73-C, MW 76-A-C, MW 102-A-C. Listed test results based on Axalta Coating Systems standards, following IEC standards 60851.

Product Criteria

Market
- Motors / Generators
- Automotive
- Transformers

Application
- Basecoat

Additional features
- Cresol-free
- UL-approved

Product Features
Chemical base THEIC modified POLYESTERIMIDE
Thermal class 200 °C
For diameter range
0.01 - 0.80 mm
Solid content (1g, 1h, 180 °C)
26.0 − 28.0 %
Viscosity DIN 53015
40 − 70 mPas (23 °C / 73.4 °F)
Special characteristics
THEIC Polyesterimide cresol and phenol free for fine wires.

To request the technical datasheet for this product we would ask you to provide your data via the following form.

Please enter your first name.
Please fill in this field
Please enter a valid email address
Required field
Please verify that you're not a robot
Your captcha response was incorrect. Please try again.