Voltatex 8611 CX


Voltatex® 8611 CX represents a class of thermoplastic bonding wire enamels. Voltatex 8611 CX  bonding wire enamel can be applied to polyurethane or polyesterimide base coats. Magnet wires coated with Voltatex 8611 CX as bond coat may be bonded by resistance heating, solvents or hot air. The minimum bonding temperature is 140 °C, but optimum bond strength requires a temperature above 170 °C. Combined with other Voltatex wire enamel products Voltatex 8611 CX as bond coat exceed the requirements and technical conditions of IEC 60317-35/36 and acc. ANSI/NEMA MW 131-C, MW 135-C and MW 136-C. Listed test results based on Axalta Coating Systems standards, following IEC standards 60851.

Product Criteria

Market
- Motors / Generators
- Automotive

Application
- Bondcoat

Product Features
Chemical base POLYAMIDE
Thermal class  
For diameter range
0.03 − 0.50 mm
Solid content (1g, 1h, 180 °C)
10.0 − 12.0 %
Viscosity DIN 53015
300 − 400 mPas (23 °C / 73.4 °F)
Special characteristics
Bond topcoat over polyesterimide or polyurethane basecoat

To request the technical datasheet for Voltatex 8611 CX we would ask you to provide your data via the following form.

Please enter your first name.
Please enter your last name.
Please enter your country.
Please enter your email address.