Voltatex 7336 A


Magnet wires insulated with Voltatex® 7336 A combine a high degree of thermal rating, excellent mechanical properties a wide application range. Additional typical properties are good chemical resistance, a high level of flexibility, transformer oil resistance acc. IEC 60851-4 and Danfoss approval for use in hermetic compressors.   In order to achieve increased resistance to chemicals, an application combined with polyamideimide based topcoat (e.g. Voltatex 81.., Voltatex 82.., Voltatex 83.. or Voltatex® 85..) is needed. Magnet wires coated with Voltatex 7336 A exceed the requirements and technical conditions of IEC 60317-8 and acc. ANSI/NEMA MW 30-C, MW 72-C and MW 74-C. Combined with other Voltatex wire enamel products Voltatex 7336 A is usable for wires acc. ANSI/NEMA MW 35-C, MW 73-C, MW 76-A-C, MW 102-A-C. Listed test results based on Axalta Coating Systems standards, following IEC standards 60851

Product Criteria

Market
- Motors / Generators
- Automotive
- Transformers

Application
- Basecoat

Additional features
- UL-approved

Product Features
Chemical base THEIC modified POLYESTERIMIDE
Thermal class 200 °C
For diameter range
0.30 − 3.00 mm
Solid content (1g, 1h, 180 °C)
35.0 − 37.0 %
Viscosity DIN 53015
400 − 800 mPas (23 °C / 73.4 °F)
Special characteristics
Voltatex 7336 A with improved viscosity / solid content ratio and wide application range

To request the technical datasheet for this product we would ask you to provide your data via the following form.

Please enter your first name.
Please fill in this field
Please enter a valid email address
Required field
Please verify that you're not a robot
Your captcha response was incorrect. Please try again.