Voltatex 6729


The main characteristic of Voltatex® 6729 enameled magnet wires is the excellent solderability with improved cut through temperature, heat shock and temperature index. Pin-hole and crazing resistance according to Japanese standard is one of the key properties of magnet wires enamelled with Voltatex 6729. Compared to Voltatex 6534 with an identical temperature index class, the other thermal properties are exceeded in all essential respects. Magnet wires coated with Voltatex 6729 exceed the requirements and technical conditions of IEC 60317-51 and acc. ANSI/NEMA MW 82-C. Combined with other Voltatex wire enamel products Voltatex 6729 is usable for wires  acc. ANSI/NEMA MW 83-C. Listed test results based on Axalta Coating Systems standards, following IEC standards 60851.

Product Criteria

Market
- Motors / Generators
- Automotive
- Transformers

Application
- Basecoat

Additional features
- solderable
- UL-approved

Product Features
Chemical base POLYURETHANE (modified)
Thermal class 200 °C
For diameter range
0.01 − 0.80 mm
Solid content (1g, 1h, 180 °C)
28.0 − 30.0 %
Viscosity DIN 53015
120 − 220 mPas (23 °C / 73.4 °F)
Special characteristics
Solderable magnet wire; pin-hole and crazing resistant; conform to IEC 60317-51 

To request the technical datasheet for this product we would ask you to provide your data via the following form.

Please enter your first name.
Please fill in this field
Please enter a valid email address
Required field
Please verify that you're not a robot
Your captcha response was incorrect. Please try again.